Skip to content
Call or text (815) 420-4652
A red-brick ranch house on a sunny day, a man in a gray t-shirt and jeans kneeling at the electric meter and service mast, and a plain white van in the driveway

Electrical Questions, Answered

Updated

Short answers with the numbers. The longer versions, with sources, are in the guides and on the cost page.

Get a free quote

We reply with a price. Nothing is booked until you say yes.

Rather talk? Call (815) 420-4652 or text us.

Cost

How much does an electrician charge per hour around Rockford?

No local billing data is published. Typical U.S. rates are $50 to $130 an hour, plus a $100 to $200 service call that often covers the first hour, and $150 to $200 an hour after hours. See the cost page.

How much does a panel upgrade cost?

Typical U.S. ranges run $1,500 to $4,000 for a 200-amp panel replacement and $2,500 to $6,000 for a 100 to 200 amp service upgrade. ComEd's 2022 study put upgrades at $4,000 to $6,000. See electrical panel upgrade.

How much does it cost to install an EV charger?

About $800 to $2,500 when the panel has room and $4,500 to $7,500 with a 200-amp upgrade, typical U.S. ComEd's rebate takes off up to $750 ($2,500 income-qualified) for 2027 applications. See EV charger installation.

How much does it cost to rewire a house?

About $8,000 to $30,000 for a whole house, or $5 to $17 per square foot, in national guides. Plaster walls raise it. See knob-and-tube wiring replacement.

What do electricians earn in Rockford?

The BLS May 2025 survey puts the Rockford metro median at $44.85 an hour and Illinois at $47.87. Billed rates are higher because they cover the truck, insurance and overhead. See electrician hourly rates in Illinois.

Permits and licensing

Do I need a permit for electrical work in Rockford?

For anything beyond a like-for-like swap of an outlet, switch, light fixture, fan under 35 pounds or breaker, a permit is required. See Rockford electrical permits.

Do electricians need a license in Illinois?

Illinois has no state license. Towns may require registration for up to $25 a year; Rockford does, with no exam. See licensed vs certified electricians.

Can I do my own electrical work in Rockford?

An owner can in the single-family home they live in, with a permit. Any helper must be a Rockford-registered electrician.

Which electrical code applies where I live?

Rockford, Loves Park, Machesney Park, Belvidere and unincorporated Boone County use the 2020 NEC. Roscoe, Rockton, Cherry Valley and unincorporated Winnebago County go through the county, which lists the 2014 NEC. Each town page has its own.

How do I find a good electrician?

Ask for the Rockford registration number, confirm they pull the permit, and get the scope and price in writing. See how to find an electrician in Rockford.

Panels, wiring and safety

How do I know if I need a panel upgrade?

Breakers that trip under normal use, no open spaces, a fuse box or 60-amp service, a warm panel, or a big new load like an EV charger. See signs you need a panel upgrade.

Is a Federal Pacific panel dangerous?

The CPSC closed its 1983 investigation saying its data did not establish a serious risk, and it never cleared them. Many electricians and insurers recommend replacement. See old panels and aluminum wiring.

Do Rockford houses have knob and tube wiring?

Many older ones did. 22.4% of Rockford's housing was built in 1939 or earlier, the knob-and-tube era. See knob-and-tube wiring replacement.

Do basement outlets need GFCI?

Under the 2020 NEC used in Rockford, every basement receptacle needs GFCI protection, finished or not. See outlets and GFCI.

When is an electrical problem an emergency?

Smoke, a burning smell, sparking, a panel or outlet that is hot, or wires down outside. Turn off the breaker if it is safe and call 911 for fire or down wires.

ComEd, storms and generators

Who fixes a storm-damaged meter or mast?

ComEd fixes its service drop and meter; the mast, meter base and wires on the house are the owner's, repaired by an electrician under a permit. See storm damage to your electric service.

How long does ComEd take to reconnect after an upgrade?

ComEd asks for at least two weeks' notice for overhead connections, and electricians in its 2022 study reported about 4 weeks.

Can I hook a generator to my house?

With a transfer switch or a listed interlock and a permit, about $400 to $1,600 installed. Never backfeed through a dryer outlet. See generator installation.

Does ComEd give rebates for EV chargers?

For 2027 applications, up to $750, or $2,500 income-qualified, through a ComEd-network installer. See Illinois EV charger rebates.

Still have a question?

Ask it in the quote form. We answer along with the price.