
Signs You Need an Electrical Panel Upgrade
Updated
Get a free quote
We reply with a price. Nothing is booked until you say yes.
Rather talk? Call (815) 420-4652 or text us.
Short answer
Part of Electrical Panel Upgrade.
The signs, roughly in order of urgency
- Heat, smell or sound at the panel. A warm cover, a burning smell, buzzing or crackling. Turn off what you can and call the same day.
- Scorch marks or rust inside. Rust usually means water is getting in at the mast or meter, common on old overhead services.
- Breakers that trip under normal use, or a main breaker that trips. A single circuit tripping can be one bad appliance; the house tripping is capacity.
- A fuse box or a 60-amp service. Common in houses built before 1960, and most insurers ask about it.
- A Federal Pacific Stab-Lok or Zinsco panel. See old panels and aluminum wiring.
- No open spaces, with tandem or "cheater" breakers doubled up. Belvidere's 2025 amendments ban tandem breakers in newly installed panels (Belvidere Ord. 703H).
- Lights dim when the furnace, air conditioner or microwave starts. Sometimes a loose connection, sometimes an undersized service.
- A big new load is coming: an EV charger, a heat pump, an electric range or dryer, a hot tub, a finished basement or an addition.
Why it comes up so often in Rockford
46.5% of the City of Rockford's housing units were built before 1960, about 1 in 2, and 27.7% more between 1960 and 1979 (Census Bureau). Houses from those decades were built for far less electrical load than today's. Many have had a 100-amp panel added since, which handles a gas-heated house fine and gets tight once electric loads are added.
Panel, service, or neither
Not every sign means a bigger service. A full panel on a 200-amp service may only need a larger panel or a subpanel. A 100-amp service in a gas-heated house may handle a charger after a load calculation, at a lower charging setting. ComEd's 2022 study, which asked electricians about real jobs, put typical costs at about $1,000 for a replacement panel without a service upgrade, $4,000 to $6,000 for an amperage upgrade, and $400 for a new dedicated circuit (ComEd study). National cost guides in 2026 run $1,500 to $4,000 for a 200-amp panel and $2,500 to $6,000 for a 100 to 200 amp upgrade.
What changes when you upgrade in Rockford
Rockford's 2020 NEC amendments say that when any part of a service is replaced, the whole service has to meet current code; the disconnect goes outside or within 5 feet of the meter enclosure; and overhead service entrances go in metal conduit (City of Rockford amendments). The 2020 NEC also requires a surge-protective device on dwelling services and an outdoor emergency disconnect on one- and two-family homes (IAEI). Loves Park and Machesney Park add a 16-space minimum panel on service work (Loves Park Ord. 4678-25). Details, ComEd's part and the permit are on the electrical panel upgrade page.
Sources: U.S. Census Bureau, ACS 2020-2024 5-year, via Census Reporter; ComEd, Home infrastructure upgrades to enable residential electrification (2022); City of Rockford, Local Amendments to the 2020 NEC; IAEI Magazine, Residential changes for the 2020 NEC; City of Loves Park, Ord. 4678-25 (2020 NEC); City of Belvidere, Ordinance 703H; National electrician cost guides (2026 data)
Want a price for your own home?
Call, text, or send the form with what you need done and the panel size if you know it. You get a written price before any work starts.
Quick answers
How do I know if my panel is 100 or 200 amps?
Look at the main breaker at the top of the panel; the number on its handle is the service size. A panel label may also list its maximum rating, which can be higher than the service.
How much does a panel upgrade cost?
Typical U.S. ranges run $1,500 to $4,000 for a 200-amp panel and $2,500 to $6,000 for a 100 to 200 amp service upgrade. ComEd's 2022 study put upgrades at $4,000 to $6,000. See the cost page.
Is a tripping breaker a sign I need a new panel?
Sometimes. One circuit tripping is often a bad appliance or an overloaded circuit. The main breaker tripping, or several circuits tripping when big loads run, points at capacity.
Do I need a bigger panel for an EV charger?
Not always. A load calculation decides it. Many 200-amp houses have room; many 100-amp houses need an upgrade or a lower charging setting.
Are tandem breakers allowed?
Only in panels listed for them and in the positions the label allows. Belvidere's 2025 amendments ban them in newly installed panels.
Rather have it handled?
Tell us what you need done. We reply with a written price first, and nothing starts until you agree.
