
Get a free quote
We reply with a price. Nothing is booked until you say yes.
Rather talk? Call (815) 420-4652 or text us.
Roscoe in short
- 2001
- median year built (Rockford 1963)
- 3.2%
- of homes built before 1960 (Winnebago County 35.5%)
- 52.6%
- built 2000 or later
- 2014 NEC
- electrical code in force
The houses
How old Roscoe homes are, and what that means for the wiring
Much of Roscoe was built in the last 25 years. 52.6% of its 4,312 homes went up in 2000 or later and the median year built is 2001, compared with 1963 in the City of Rockford. Newer houses here usually have 200-amp services and copper wiring, so the calls are less about old panels and more about adding load: an EV charger in the garage, a finished basement, a hot tub, or a standby generator.
Only 1.2% of homes in Roscoe date from before 1940, so knob-and-tube wiring is rare here compared with Rockford, where 22.4% of homes are that old.
Heating in Roscoe is mostly gas: 90.1% of occupied homes use utility gas and 9.7% use electricity. Adding a heat pump, an electric water heater or a car charger is the kind of load that can push a 100-amp service past its limit; ComEd's own 2022 study put a service upgrade at $4,000 to $6,000.
The permit
Who permits and inspects electrical work in Roscoe
Roscoe is one of six towns whose permits and inspections are handled by the Winnebago County Building Division, along with unincorporated parts of the county. That matters for two reasons. The county still lists the 2014 National Electrical Code, while the City of Rockford, Loves Park, Machesney Park and Belvidere moved to the 2020 edition in 2025, so a job here can be reviewed under older rules than the same job a few miles south. And the county's fee schedule dates from 2016. If you are unsure whether your address is inside Roscoe or in the unincorporated county, the county office can tell you from the parcel.
Roscoe housing vs Winnebago County and Rockford
| Measure | Roscoe | Winnebago County | City of Rockford |
|---|---|---|---|
| Housing units | 4,312 | 125,002 | 67,423 |
| Median year built | 2001 | 1971 | 1963 |
| Built 1939 or earlier | 1.2% | 15.5% | 22.4% |
| Built before 1960 | 3.2% | 35.5% | 46.5% |
| Built 1960 to 1979 | 5.9% | 27.9% | 27.7% |
| Built 2000 or later | 52.6% | 13.6% | 7.6% |
| Heated mainly by electricity | 9.7% | 12.6% | 14.8% |
| Heated by utility gas | 90.1% | 83.5% | 82.4% |
| Owner-occupied | 71.2% | 65.9% | 54.9% |
Source: U.S. Census Bureau, ACS 2024 5-year (2020-2024), tables B25003, B25034, B25035 and B25040. ZIP codes covering Roscoe: 61073, 61080, 61072.
Local rules
Electrical permits, code and registration in Roscoe
Winnebago County's own code library did not load, so the county's homeowner-permit and exemption rules were not confirmed.
- Permits and inspections
- Roscoe does not run its own electrical inspections. Village code section 15-2 makes the Winnebago County building inspectors the village's building officials, so electrical permits and inspections go through the county Building Division at 404 Elm Street in Rockford, (815) 319-4350. The village itself issues zoning permits for decks, pools, sheds and garages. source
- Electrical code
- Section 15-1 of the village code adopts the county's building, plumbing and electrical codes by reference. Winnebago County lists the 2014 National Electrical Code (Ordinance 2016-CO-035, March 10, 2016). An ordinance to adopt the 2023 edition was on a county committee agenda for November 12, 2026; whether it passed was not confirmed. source
- Contractor registration
- Roscoe used to register contractors ($25 and proof of insurance). The village board voted 6-0 to end contractor registration, in minutes posted November 20, 2023. source
- Permit fees
- Roscoe adopts the county fee schedule too. The county schedule (adopted August 11, 2016) charges a $40 processing fee per trade plus, for example, $25 flat for small residential wiring or a reconnect and $82 to $110 for residential wiring up to 2,000 square feet. The county says fees can change and to call to confirm. source
- Also worth knowing
- Because the county inspects here, an electrician pulls the same county permit in Roscoe as in Rockton, Cherry Valley or a house outside any town limits. source
About Roscoe. Roscoe is a village in Winnebago County along the Rock River, with 10,983 residents at the 2020 census. North, off I-90 and IL 251 from Rockford. Wikipedia
The utility. ComEd serves Roscoe. A service upgrade needs ComEd to disconnect and reconnect the meter after the local inspection; see electrical panel upgrade.
Pricing, every service and the rest of the service area are on the electrician in Rockford, IL homepage and the cost page.
Electricians near Roscoe
Common questions
Electrical questions from Roscoe
Do I need a permit for electrical work in Roscoe?
Most new wiring, panel and service work needs one. Roscoe does not run its own electrical inspections. Like-for-like swaps of a switch, outlet or light fixture without changing the box or wiring are usually exempt in this area; see Rockford electrical permits for how the rules compare.
Which electrical code does Roscoe use?
Section 15-1 of the village code adopts the county's building, plumbing and electrical codes by reference. Winnebago County lists the 2014 National Electrical Code (Ordinance 2016-CO-035, March 10, 2016).
Does an electrician need to be registered in Roscoe?
Roscoe used to register contractors ($25 and proof of insurance). The village board voted 6-0 to end contractor registration, in minutes posted November 20, 2023.
How old are the homes in Roscoe?
The Census Bureau's 2020-2024 survey puts the median year built at 2001, with 9.1% of 4,312 housing units built before 1980 and 1.2% before 1940.
What does an electrician cost in Roscoe?
No local price data is published, so the honest numbers are typical U.S. ranges: $50 to $130 an hour, $100 to $200 for a service call, $1,500 to $4,000 to replace a 200-amp panel and $800 to $2,500 for a Level 2 EV charger when the panel has room. Every range is on the cost page.
Electrical work in Roscoe?
Tell us what you need done. We reply with a written price before any work starts.
